Air Duct Cleaning in Marshall, WI
Marshall, WI is a Dane County village on the Maunesha River, east of Sun Prairie on Highway 19 and south of Columbus. Pro Air is based in Madison and comes to Marshall for duct and dryer vent cleaning — the owner on the job, the price in writing before he starts.
Got it — thank you.
Your request is on its way to Luis. He reads every one himself, and most quotes go out the same business day — from the person who would be doing the work, not an auto-reply.
Nothing else to do on your end. If you have not heard back by the next business day, or would rather talk it through now, the number below reaches the owner directly.
Call Us: 608-285-2825If the protected online form does not appear, call or text 608-285-2825.
Air Duct & Dryer Vent Cleaning in Marshall, WI
Marshall has been a mill town since 1852, when the grist mill went up on the Maunesha, and the village that incorporated in 1905 with 467 people still has the two-stories and cottages of those decades around the mill pond and the old depot. Forced air reached those houses as a retrofit, long after they were built, and the ducts have mostly never been opened since.
The village grew to 3,432 people by 2000 and 3,787 by 2020, and that growth is in the subdivisions on the edges — houses with flexible branch duct that still holds the drywall dust of the build. Two very different duct jobs share the 1,500 housing units counted here in 2010, and the age of the house tells us which one to expect before we arrive.
Both get the full treatment: trunk, returns and branches emptied under vacuum, the dryer vent cleared on the same trip when it is booked, and the pile of debris photographed before it goes.
Marshall Areas We Serve
Village or the roads around it: Call Us: 608-285-2825 and Luis will confirm.
Mill-Town Two-Stories and Edge Subdivisions Fill Their Ducts Differently
The blocks around Marshall’s mill pond were built when the Blaschka family’s mill and the Milwaukee Road depot were the reasons the village existed, and their houses were heated by stoves, then by boilers or gravity furnaces. The blower-driven system in one of those basements today was fitted in decades later along whatever route the joists and closets allowed, and what it holds is the plaster grit and dust of every renovation since, which no filter ever reached.
The subdivisions on the village edge are the other job. A house built in the last twenty years has flexible branch duct and a lined trunk, both open to the site for weeks while it was built, and the fine sanding dust and sawdust that settled inside have been redistributed by the blower ever since. We clean those with air whips under negative pressure rather than rotary brushes, so the liner stays intact. Both kinds of house get the same standard — the whole system, priced in writing first — but the older one gets an inspection before the number, because the retrofit layout decides the work.
What We Look For in Marshall
Old village house or newer subdivision? Call Us: 608-285-2825 and the written quote follows.
Marshall Homes, and What They Mean for the Job
Andrew Bird, Zenas Bird and Aaron Petrie began a settlement on the Maunesha River in June 1837; it burned in 1838, was known as Bird’s Ruins for a decade, became Hanchettville in 1849 and then Howard City when the rail depot opened, and was incorporated as the village of Marshall on 24 January 1905 with 467 people. The grist mill of 1852 passed to the Blaschka family in 1908 and ran as the Blaschka Milling Co., and its mill pond is still the center of the village; Milwaukee Road passenger service ended in 1957. The 2020 census counted 3,787 people, against 3,862 in 2010, when there were 1,500 housing units, 1,437 households and a median age of 34.4; the village covers 2.29 square miles on Highways 19 and 73.
Marshall’s housing is the old village and the new edge, with the post-war streets between. Each hands us a different job, described below for the village as a whole; your own system is examined before a figure is named.
-
1850s–1920s: the mill-pond and depot blocks
Houses that started with stoves and boilers and received forced air two generations on. The trunk hugs the basement, a lone return serves the house, branches ride up inside closets and the floor registers carry decades of paint. We trace it before we quote it.
-
1950s–1980s: the post-war streets
Galvanized trunks that have held decades of dust without complaint, every register reachable. These Marshall houses are priced from a phone call, and their before-and-after photos tend to be the most dramatic in the village.
-
2000 onward: the edge subdivisions
Flexible branch duct on lined trunks, which rules out brushes and calls for air whips. The builder’s dust comes out on the first visit; the upstairs laundry’s long dryer run becomes the yearly one.
What this means for your quote: a subdivision or post-war house is a count of registers and returns; a mill-pond two-story gets a look first. The number is written before the work.
Local, Honest, and Thorough
Honest About Where We Are
Marshall is east of our Madison base along Highway 19, and the owner drives it himself with his own equipment.
Commercial Equipment
7,000 CFM push-pull cleans the whole system.
No Upsells
Honest, upfront pricing — only what you need.
Owner-Operated
Luis runs every job himself. No call center, no rotating crews.
What We Do for Marshall Homes
Every service for Marshall homes, from a first cleaning on the village edge to a retrofit two-story by the mill pond.
Air Duct Cleaning
Mill-pond retrofits and edge-subdivision systems, every branch under negative pressure.
Learn moreDryer Vent Cleaning
Upstairs-laundry dryer runs in the newer Marshall houses cleared to the cap and checked.
Learn moreDeodorizing & Sanitizing
For a system that still smells after cleaning — a damp mill-pond basement, usually.
Learn moreUVC Light Installation
A UV-C lamp where a Dane County coil shows moisture or growth after summer.
Learn moreAC & Furnace Service
The furnace behind the trunk, inspected before the heating season starts.
Learn moreApartment Dryer Vents
Marshall duplexes and rentals, one dryer-vent document per unit.
Learn moreWhere Our Reviews Come From
Pro Air has earned 180+ five-star Google reviews since 2018 serving Northern Indiana. They are Northern Indiana reviews, not Marshall ones, and the count is labelled that way wherever it appears. Read how Pro Air got here.
Marshall Duct & Dryer Vent Questions, Answered
Booking, pricing and timing in Marshall
How is duct cleaning priced for a Marshall home?
By counting furnaces, registers and returns and allowing for the trunk, with the figure written before the visit. Subdivision and post-war houses are priced on the phone; an older village house is looked at first. A text works too — send the address and the number comes back the same way.
How long does the cleaning take in a Marshall house?
A morning or an afternoon: two to three hours for a house on one furnace, longer where a retrofit two-story or a second furnace adds runs, and the quote says which. Adding the dryer vent to the same visit costs less than an hour more.
Can the dryer vent be done in the same Marshall visit?
Yes; both get their own before-and-after photos under one written price, and on a two-story with an upstairs laundry the long run is worth clearing every year.
Do you cover the whole village and the roads around it?
Yes, from the mill pond to the newest edge streets, and Sun Prairie, Cottage Grove and Columbus on the same routes.
Marshall homes, codes and conditions
Can the ducts in a 1900s Marshall house be cleaned without damage?
Yes. The ductwork was added long after the house was built, and that kind of sheet metal cleans well; we map the trunk and the returns first, then work through the registers already in the floors, and the plaster and the frame are never touched.
Why does a new Marshall subdivision house need its ducts cleaned?
Because a duct system is finished long before the house is. While the drywall was sanded and the trim was cut, the open registers took in all of it, and it has been circulating since move-in day. One cleaning with air whips clears it; afterward an ordinary three-to-five-year interval is enough.
What does Wisconsin code require for a Marshall dryer vent?
Wisconsin’s Uniform Dwelling Code answers that at SPS 323.14(2): a rigid, smooth-walled metal run; flexible metal only as a short connector in plain sight; and a maximum length set by the dryer maker, reduced for each elbow. The foil hose in many older Marshall basements predates the rule, and it is pointed out when we clear the run.
Does the mill pond make ducts in Marshall smell?
Homes on low ground near the water can run damp, and dust inside a damp return holds a musty edge. Cleaning removes it; sanitizing is offered only when a cleaned system still needs it.
Does duct cleaning help with radon in a Marshall basement?
No, and in Dane County the question is worth asking on its own: Public Health Madison & Dane County found elevated radon in nearly half of the county homes tested over three years. The remedy is a test and, where the level is high, a mitigation system. Duct cleaning is a different service for a different problem.
Why Marshall homeowners choose Pro Air
Who does the work on a Marshall job?
The owner, from the phone call to the last photo; no crew and no call center between you and him.
Why does 7,000 CFM matter for a two-story?
The supply trunk in a two-story rises a full story, and whatever we loosen up there has to come back down through the machine rather than out of the bedroom registers. Holding that much duct under vacuum takes 7,000 CFM; a portable unit runs out of pull within a few feet.
Do you push add-ons in Marshall?
No. The only time a UV-C lamp is mentioned is when the coil shows moisture or growth, and the only time a treatment is mentioned is when a cleaned system still smells. Neither is on the quote unless you put it there.
We Also Serve These Towns
Ready for Cleaner Air in Marshall?
Call the owner directly, or send the form and get a written price back.